Slide Mounting Media
Electron Microscopy Sciences Citifluor™ Mountant Solution AF2, Glycerol Based, Non Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. A glycerol solution contains an amine antifadent. Select buffer.
Material: Glycerol Based
Type: Non Hardening
Electron Microscopy Sciences 3040 - Mounting Medium, 1/EA
Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a firm, durable bond between Technovit and the specimen. Technovit 3040 consists of two components–powder and liquid–allowing simple mixing, easy adherance to the specimen, and fast curing. For fixing the mount, a high viscous consistency is required(i.e. a mixing ratio of approximately 2-3 parts per volume powder: 1 part per volume liquid) has proven to be the most advantageous. Includes: 1 x 1000g Technovit 3040 powder, 1 x 500 ml Technovit 3040 liquid.
Enzo Life Sciences Antifade mounting medium with DAPI (hardset) (10ml)
Antifade mounting medium with DAPI (hardset) is an antifade reagent that causes little or no quenching. Use of the mounting medium significantly extends the photobleaching half-life of the fluorescent stain. The inclusion of DAPI allows for staining of the nucleus. Long Term Storage: -80°C. Applications: IF, IHC, Fluorescence microscopy, Fluorescent detection .
Enzo Life Sciences SEEBRIGHT Mounting Medium with DAPI (100tests)
SEEBRIGHT Mounting Medium with DAPI is an antifade reagent that minimizes photobleaching. Use of the mounting medium significantly extends the lifetime of fluorescent signals. The inclusion of DAPI allows for staining of the nucleus. Quantity: Each vial of SEEBRIGHT Mounting Medium with DAPI contains 200 µL sufficient for 20 tests (ENZ-GEN420-0020) or 1000 µL sufficient for 100 tests (ENZ-GEN420-0100). Apply mounting medium to the sample area as desired. Long Term Storage: +4°C. Applications: IF, Fluorescence microscopy, Fluorescent detection FISH.
Electron Microscopy Sciences Embed 812 Resin 450 ML
EMbed 812 has the same characteristics as Epon 812, physically, and provides the same results in preservation, handling, curing and sectioning. EMbed 812 may cause etching on selected plastics. All formulas for mixing and using Epon 812 can be applied to EMbed 812, e.g. Luft's procedure, Mollenhauer's and EPON-ARALDITE mixtures.
Electron Microscopy Sciences Technovit Medium 4000 Large Kit
Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together first and the powder is mixed in last. The color is white opaque.
Technovit 4000 is distinguished by its low shrinkage when polymerizing and its perfect margin fit. Due to its excellent flow characteristics, Technovit 4000 guaranteed that geometrically demanding samples are optimally embedded. Its excellent adhesion properties with regard to metal are a guarantee of gapless embedding of all metal samples. These properties are of particular importance when working with samples that require good edge definitions.
After mixing, Technovit 4000 can be used for casting for approximately 4 minutes and takes approximately 8 minutes to cure.
Electron Microscopy Sciences EMS Silver Conductive 18DB70X Coating 15 GR
Silver Conductive Coating 18DB70X is a direct substitute for Silver Conductive Fluid 416, which is no longer available. This material was specially formulated for use in geographic areas that demand the use of low VOC (Volatile Organic Compounds) products. It also provides low ohms at very thin dry film thickness on almost any surface, and exhibits excellent long term shielding and grounding properties.
Electron Microscopy Sciences LR White resin only; Med. Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.
Electron Microscopy Sciences Tempfix Adhesive Set
A thermoplastic adhesive for mounting powder specimens and small particles for SEM. It does not contain any solvents and it is stable in high vacuum. It is not sticky at room temperature but becomes adhesive at 40 degree C and melts at 120 degree C. Tempfix may also be used as an embedding medium. EMS introduces a new reliable line of conductive adhesives which are certified by the Bureau Veritas Quality International. Quality Standards: ISO 9001; EN29001; ANSI/ASQC Q91
Electron Microscopy Sciences EUKITT Mounting Medium, 500 mL
The product holds up well in the presence of water and trace levels of Alcohol. It is very well suited for all pale color preparations as well as colorless preparations. EUKITT has a neutral pH and offers extended storage times of all slide preparations for years without any sign of cracking or discoloration. The medium itself is colorless and does not change the color and or the structure of the samples mounted with the medium. EUKITT is temperature resistant to heat and cold (-170°C), as well as humidity, daylight and UV light.
Electron Microscopy Sciences LR White Resin, Medium, Uncatalyzed 500 ML
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues.
Kessil A Dicon Brand PR160L Mounting Module, for PR300 Shielding Box Plus
Kessil PR160L Mounting Module is a mechanical interface designed to securely mount Kessil PR160L-275 and PR160L-300 LED Lights into the PR300 Shielding Box Plus for a fully protected environment with efficent temperature control. This module ensures perfect lamp alignment to maintain consistent geometry and uniform irradiation during high-intensity photoreactions.
Electron Microscopy Sciences Citifluor™ Mountant Solution CFM-3, Glycerol Based, Non Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Glycerol-based antifadent contains a phoenlic antifadent of neutral pH and a refractive index of ~1.52. Acts as a Clearing Solution.
Material: Glycerol Based
Type: Non Hardening